10 Inch Water Purifier Carbon Block CTO Water Filter ACTIVATED CARBON 5 MICRONTASTE/ODOR CARBON WATER FILTER FOR REVERSE OSMOSIS

10 Inch Water Purifier Carbon Block CTO Water Filter ACTIVATED CARBON 5 MICRONTASTE/ODOR CARBON WATER FILTER FOR REVERSE OSMOSIS

1. 5-MICRON COCONUT SHELL ACTIVATED CARBON BLOCK CTO

2. Removes Chlorine, organic chemicals, bad taste and odors

3. 6,000 GAL @ 1.0 Gallons Per Minute & 5um Nominal um Rating.

4. High Chemical Absorptive Capacity & Efficient VOC, TOC, and Turbidity Reduction

5. Performance Tested and Verified by independent Laboratory Testing.

6. Dimensions: Industry Standard 10” Carbon Block

7. Maximum Operating Temperature: 125 °F

8. Maximum Operating Pressure: 250psig

9. Maximum Differential Pressure: 100 psid

10. Collapse Pressure: 200 psid

11. The Carbon Block CTO water filter cartridges are used for reverse osmosis systems & other water filtration systems. This filter has been tested  and verified by independent Laboratory testing and also meet the NSF Standards and Industry Regulations.

12. Key Specs include a 5 micron nominal rating & removal of Chlorine, organic chemicals, unnatural tastes and odors found in TAP water. They are made of fine COCONUT SHELL carbon that offers a much finer filtration of suspended particle, chemicals, & dirt.

13. 
    

     This filter is compatible (will fit ANY) with a universal industry standard Reverse Osmosis Filtration unit or any other water filter unit with a 10” inch cartridge housing. This filter is sealed and wrapped for sanitary standards.

14. WARNING: For drinking water applications, do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the unit. Activated Carbons are NOT designed to kill or remove bacteria or viruses